|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Full manual. Exactly what I was looking for. Thanks!
 ;
Quality of the product received was crisp and clear. Better than expected.
;
The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen on the phone.
If completely discharged, the battery will take 3 hours to recharge. If you leave the phone on while it is in the desktop holder, the battery will take longer to charge.
When the battery charge level becomes low, the low battery sensor will alert you in three ways: Sounding an audible tone, blinking the battery icon outline, and displaying �LOW BATTERY WARNING�. If the battery charge level becomes exceedingly low, the phone will automatically switch off and any function in progress will not be saved.
Caring for the Battery
1. You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery�s performance. 2. Use only LG batteries and chargers. LG�s chargers are designed to maximize the battery life. 3. Do not disassemble or short-circuit the battery pack. 4. Keep the metal contacts of the battery pack clean. 5. Replace the battery when it no longer provides acceptable performance. The battery pack may be recharged hundreds of times until it needs replacing. 6. Recharge the battery if it has not been used for a long time to maximize usability. 7. Do not expose the battery charger to direct sunlight or use it in high humidity, such as the bathroom. 8. Do not leave the battery in hot or cold places, this may deteriorate the battery performance.
Using the Desktop Holder
The LG-DM110 desktop holder has a slot accommodate with a battery. The slot accommodates a phone with a battery pack for charging. Warning! Use only the desktop holder provided with the phone. Using the wrong charger may cause damage to your phone or battery.
1. Plug the charger into a wall outlet. The charger should operate on a 110V AC source. 2. If your phone is powered on while charging, you�ll see the bars in the battery icon cycle. When the battery is fully charged, the bars in the battery icon will flash on and off. If your phone is powered off, the display will show charging status. �Charging... (Phone is Off)� or �Charging Completion� will be displayed.
14
15
|
|
|
> |
|
